Home > Lightnin' Grip Loader >

(#8) AR15 Modified for Colt M4, Chiappa M4, Beretta ARX160, Umarex HK 416, Hammerli Tac R1,and can be modified to work with BDM Gen III Adapter Only
(#8) AR15 Modified for Colt M4, Chiappa M4, Beretta ARX160, Umarex HK 416, Hammerli Tac R1,and can be modified to work with BDM Gen III Adapter Only


 
Price: $8.00


Product Code: COLTM4-ADAPTERONLY
Qty:

Description
 
AR 15 modified for the COLT M4, CHIAPPA M4, BERETTA ARX160, Umarex HK 416, Hammerli Tac R1, and can be modified to work with Black Dog Machine Gen III

*** LONGER M4 MAGAZINES NEED A SPECIAL MODIFICATION*** (click for details) (same info in picture at bottom of page)

Email us for customer's pictures of the adapter that he modified for his BDM Gen III

Adapter INSTRUCTIONS for COLT M4, BERETTA ARX160, Chiappa M4, HK416, Hammerli Tac R1 Magazines.

(downloadable PDF)

Hold the loader in your left hand, and press the adapter lock with your thumb. With your right hand, hook the Mag Adapter into the top of the Lightnin' Grip Loader and swing the bottom into the slot. Take your thumb off of the lock button. it should pop out to the locked position when the adapter is in fully seated.



Magazine inserts at an angle into the adapter. Latch is tight. Need to push latch in with thumb.


To remove the magazine, while holding like pictured here, gently press down on latch and pull out.





LIGHTNIN' GRIP LOADER INSTRUCTIONS



1.) Slide open the Bullet Reservoir Cover and drop in up to (50) 22LR cartridges.


2.) Close cover. Gently shake the Lightnin' Grip Loader, keeping it level and
the reservoir cover on top.


3.) Raise the reservoir end to slide the cartridges in to the Loading Channel.


4.) Repeat #2 and #3 until the Loading Channel fills sufficiently.



FILL WITH AMMO

5.) Raise the reservoir end and smoothly squeeze the trigger to load a round
into the magazine. The trigger needs to return to the nearly out position to
seat the round and stage another bullet for loading. It is usually a good idea
to count the bullets going in to know when to stop. It is possible to force in an
extra round.

NOTE: Quickly snapping the trigger in can cause the bullets to bounce in some
magazines and "hook" the rims in the wrong direction making them hard to get out.
Sometimes a hard rap on the bottom of the magazine with your palm or on a book
will bounce the bullets to unhook them.

ALIGN BULLETS
TIPS:

Some 22LR cartridges are real sticky with wax lube. After filling the reservoir, give
them a shot of Remington (Rem Oil) Teflon Spray Lube. Only a small amount is
needed.

CAUTION: the unit is molded from Lexan, and some lubes will attach it.

Not all magazines fit the same; you may need to apply a little seating pressure
against the magazine as you are loading it. As Pictured here.

Periodically take a look at our website for updated tips.

HOLD MAG SEATED AND SQUEEZE TRIGGER.


Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Using AR15 adapter for HK416 magazines October 22, 2021
Reviewer: Michael Botwin from Fresno, CA United States  
Followed the instructions and removed some of the loader wall until it fit the HK416 magazines.  Used a Dremel tool and slowly ground down the plastic.  Works great!  Functions just as well as my dedicated S&W model 41 and MP15-22 adapters.

Love my. Lightning loader!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Wont stay October 15, 2021
Reviewer: Casey Heckenlaible from Attica, IN United States  
Received this with my speed loader that was already "modified" my mags will not stay clipped to it and the slightest wiggle they release making it so when you are squeezing the trigger it just shoves the mag off.

Was this review helpful to you?